Ducati Scrambler Review
Ducati Scrambler Review
“Stylish, easy to ride, desirable and affordable”
Overall Rating 4 out of 5
You don’t have to be a fashionable hipster to enjoy the new Ducati Scrambler, its qualities shine through without the clever marketing. It’s easy to ride, small and light, has a lovely useable air-cooled V-twin with lots of low to mid-range power. There’s some lovely attention to detail, it’s stylish and, at under £7000, an affordable Ducati. Experienced hands may want a little more power and noise, but everyone else will love it.
Ride Quality & Brakes 4 out of 5
Despite the odd wheel sizes (18 inch front and 17 rear) and off road-looking Pirelli rubber, the Scrambler can hold its head high and punch well above its weight in handling terms. It’s relatively light and nimble and the wide, retro bars enable you to throw it around with ease.
Engine 4 out of 5
There’s an all-new 803cc, air-cooled, motor which is based on the old 796 Monster unit. The bore and stroke has remained the same but valve overlap, injectors, air-box and exhaust are all new. The result is 75bhp and 50.2ftlb of torque – slightly down on the old Monster but the spread of torque is greater. Power starts from low down, is linear, more than enough for this type of bike, but it does lack a little top end rush for experienced hands.
Build Quality & Reliability 4 out of 5
The level of finish is very high considering the price – there is some lovely attention to detail. Ducati have also worked in partnership with reliable quality brands like Brembo, Pirelli and Kayaba. Reliability shouldn’t be a problem as the motor is based on the proven 796 Monster.
Insurance, running costs & value 5 out of 5
The base Icon comes in at under £7000 which is exceptional value for money for a desirable, quality, good looking Ducati. In many ways it doesn’t feel like an entry level ‘budget’ Ducati, you’d estimate the price to be much higher.
Equipment 4 out of 5
ABS comes as standard but that’s it in terms of rider aids. It’s relatively basic but is designed to be at a competative price. The Kayaba suspension only has pre-load adjustment, and there’s only a single brake disc up front, but it’s controlled by a huge radial Brembo caliper.
Source: MCN
Click on the link below to view our Ducati Scrambler parts
- Published in Motorcycle Review
Ducabike – Conquest Racing
Ducabike – Conquest Racing
Italian made Ducati performance parts specialists. Ducabike – Conquest Racing has one of the largest selections of performance bolt-on accessories for your Ducati. Many of their parts are made from billet CNC machined aerospace aluminium with tones of colour combinations with high-quality carbon fibre. The highest quality aftermarket parts for your Ducati motorcycle – Italian made parts and accessories for your Italian pride and joy! DUCABIKE design and develop their own products – based on many years of experience gained on the road and the track. Every effort is made to give the maximum reliability and the best performance by use of the highest quality materials coupled with the latest production technology.
DUCABIKE is synonymous with passion for motorcycles and in a special way with Ducati bikes.
- We are a premium motorcycle product importer/distributor for premium model motorcycles.
- Conquest Racing Ltd was founded to better serve the market in terms of supply, service & support, through an easy to navigate website
- Conquest Racing Ltd has been operating since April 2012
- We have over 20 years of experience & enthusiasm in this fantastic industry.
To view DUCABIKE parts click on the link below, select your model and search in the CNC Parts
- Published in Conquest Racing Parts
Kawasaki’s New BATTERY ZX-10R revealed in AMAZING patent drawings!
Kawasaki’s New BATTERY ZX-10R revealed in AMAZING patent drawings!
By Tony Carter and Leon Rose
What do you think to this Kawasaki BATTERY ZX-10R that hinges the ‘engine’ unit out of the left side of the machine in one unit?
The jaw-dropping idea, outlined in official FACTORY patent drawings recently filed, shows how the entire power unit can be opened up from the bike itself and replaced with a fully-charged unit, or have maintenance carried out as needed.
The drawings show crucial parts of the design in order to make this work. Based on a ZX-10R chassis, it is clear to see that everything will stem from this hinge design.
That hinge is figured in most of the drawings for this new motorcycle, you can clearly see how the frame will hinge around this point in the drawing below – the hinge element is number 82 (52,53) on the drawing (top left shoulder of the bike) which shows how the whole left hand side of the frame will open up and allow the entire motor to exit the motorcycle without the need for tricky loading or unloading from the frame.
From the top-view drawing (below) it’s clear that the overall dimensions of the bike will remain the same, what is clear that the electric lump in the middle, which will carry a stack of batteries, is a self-contained unit feeding into the gearbox and conventional chain drive.
The next picture in the run of patents describes the all-important, very strong, battery tray. This sits at the bottom of item numbered 32 in the side-on image of the full bike and carries most of the pivotal weight of the battery unit as it swings out of the engine area.
Another drawing shows the frame in isolation with the hinge system clearly visible (this is the upper noted 52(53), there is a clear, strengthened shoulder to the frame with an outer brace of tubing just to the right of the hinge, and another below the hinge, in order to support the weight of the battery packs. The lower noted 52(53) and 54 shows how the frame is attached to the outer lower part of the bottom of the frame – this is to allow the entire frame to hinge out and back into place where it is secured again before the bike can be ridden.
Those outer braces are also described in the following image, which is the front of the frame shown facing out of the page, the part of the frame’s shoulders (and the frame) which moves is on the right hand side of the image – items 67,8,66 and 51 point to the moving part of the frame.
This image below is the completed idea sited in position with the battery component elements hinged out of the bike and on to a stand that sits alongside the bike. This means that the bike will effectively park next to the stand and the battery compartement would be hinged out for replacement with a full-charged unit, seriously cutting down – or possibly even negating – the need for time spent waiting for the bike to be recharged at all. Like filling up a motorcycle now with petrol, this could lead to a series of already-charged battery stores in special ‘charging stations’ where a rider can just pull up and within a couple of minutes have a new, fully-charged power unit fitted into their bike.
Another image shows this but from the front perspective and without any connecting leads in place. This image is used to show proportion of the battery engine unit in comparison to the overall motorcycle – what’s important to notice here is that with the motor out of the bike there is nothing engine or chassis-wise visible on the right hand of side of the motorcycle from the front.
What is also intriguing in the above drawing is element 91 which is an extension of the frame’s base which holds the batteries out of the bike. The extension is there to effectively catch and support the bike’s front wheel – like a moving choc block that is ready to catch the front wheel initially and once the new battery is in the bike and the rider is back on the bike it will slide back into the base to allow the bike to be ridden away – if the system is used outside and the bike needs to be in the right position for an automatic engine-battery-swap. What that could mean is that what we’re looking at here is essentially the fuel-pump-for-the future where you ride into the choc and leave the bike upright as a machine automatically swaps the battery unit for a fully charged one.
- Published in Motorcycles
The next Ducati Superbike will be a V4
The next Ducati Superbike will be a V4
Desmosedici GP will become Ducati’s Superbike father from 2018, so long V2, so long Superquadro.
Is an ‘official’ rumor that 2018 will mark the first real Superbike with a V4 engine (Desmosedici RR is an exotic) from Ducati.
The angle will remain 90 degree and the frame will be for sure the perimetral type.
Gigi Dall’Igna’s actual Moto GP project will finally be used 100% as a platform for a street bike development.
It’s interesting to see if Ducati will still keep a V2 engined superbike in it’s offer and, in this case, if will do it, if they’ll coma back to the trellis frame – as they won;t use it anymore in WSBK and not needing certain values for rigidity / performance / weight.
We’ll see about the V Twin SBK, but what is a certain thing now, the next generation Ducati Superbike will be a V4.
Source Ducatibog.net
- Published in Motorcycles
Ducati Panigale 1299 Carbon Fibre Parts Accessories
Ducati Panigale 1299 Carbon Fibre Parts Accessories
Click here to visit shop
- Available in gloss or satin finish.
- Autoclave production
- Select Gloss or Satin/Matte finish
- 100% carbon fibre
- UV treated
- 100% fitment guarantee
- Fit extremely well as in no drilling or dremelling
- Light yet rigid and strong
- Consistent weave
- No pinholes in the finish
- Nanotechnology to produce superior parts
Fullsix carbon fibre parts guarantee an excellent appearance and perfect manufacturing. By using state-of-the-art technology and an innovative blend of materials, we assure you that our parts will upgrade your motorcycle both visually and in terms of performance. We have paid particular attention to ensuring that all carbon fibre parts are UV protected through the use of special lacquers, as we know that our customers desire eternal beauty and perfection.
The uniqueness of our products is not just an advertising slogan, but the underlying philosophy of our company itself. Since we believe in providing only the best for your motorcycle, we have developed a unique production monitoring system that ensures that all Fullsix products are manufactured according to the latest protocols and “best-in-the-industry” standards. Through the use of unique barcode technology, CDT Group is the only company in the market that is capable of tracing products through the entire manufacturing process, resulting in products that you completely trust.
Fullsix stands for perfect looks, precise fitting, outstanding performance and supreme quality.
- Published in Motorcycles
MV Agusta F3 Carbon Fibre Parts
MV Agusta F3 Carbon Fibre Parts
Fullsix Carbon guarantee an excellent appearance from perfect manufacturing. Using state-of-the-art technology and an innovative blend of materials, we assure you that our parts will upgrade your motorcycle both visually and in terms of performance.
CLICK LINK BELOW TO VIEW PARTS
We have paid particular attention to ensuring that all MV Agusta F3 carbon fibre parts are UV protected through the use of special lacquers, as we know that our customers desire eternal beauty and perfection.
The uniqueness of our products is not just an advertising slogan, but the underlying philosophy of our company itself. Since we believe in providing only the best for your motorcycle, we have developed a unique production monitoring system that ensures that all Fullsix products are manufactured according to the latest protocols and “best-in-the-industry” standards.
Through the use of unique barcode technology, CDT Group is the only company in the market that is capable of tracing products through the entire manufacturing process, resulting in products that you can completely trust.
The FullSix brand was designed with the desire to achieve perfection. Through the use of autoclave technology and new composites we guarantee our customers only the best carbon fiber products. Our innovative manufacturing processes make us the only company in the market which is able to ensure flawless production for your MV Agusta F3 Carbon Fibre Headlight Fairing.
MV Agusta F3 Carbon Fibre enhance both the visual appearance and performance of your bike.
For MV Agusta F3 – 675/800
- Exact same weave as CRC Corse weave/MV Agusta OEM
- Autoclave production
- Select Gloss or Satin/Matte finish
- 100% carbon fibre
- UV treated
- 100% fitment guarantee
- Fit extremely well as in no drilling or dremelling
- Light yet rigid and strong
- Consistent weave
- No pinholes in the finish
- Nanotechnology to produce superior parts
- All parts and accessories that are needed to install your Fullsix product are included
- Fullsix stands for perfect looks, precise fitting, outstanding performance and supreme quality.
MV Agusta F3 Carbon Fibre Parts
- Published in Conquest Racing Parts
Yamaha R1 M1 Carbon Fibre Parts Accessories
Yamaha R1 M1 Carbon Fibre Parts Accessories
Now Available Conquest Carbon
Fullsix manufactures of carbon fibre parts are in their latest stages of completing their range of carbon fibre parts for the new 2015 Yamaha R1 M1. Be sure to Bookmark this site for their parts.
About Fullsix Carbon:
CDT Group is known worldwide for its quality parts which are made from only the best materials and technology. We use only five star materials, shaping them into real pieces of art with our precisely engineered autoclave technology.
Our products stand out in terms of quality, as every step of the production process can be traced and monitored using barcode technology. This enables the company to have complete control over the production of its products, so that each and every product which carries the FullSix logo has consistency and quality that can be fully trusted.
All steps of of the production process are manufactured to perfection: from the cutting of fabric to the final paint job.
Our collaboration with world renowned research institutes, such as the Jožef Stefan Institute, has placed us amongst the most innovative enterprises in the field of composite manufacturing. With scientific precision we carefully determine the properties of the materials which will enhance the visual appearance and performance of your motorcycle.
This enables us to guarantee flawless production processes and the top quality attributes expected of FullSix products.
FullSix carbon fibre parts guarantee an excellent appearance and perfect manufacturing. By using state-of-the-art technology and an innovative blend of materials, we assure you that our parts will upgrade your motorcycle both visually and in terms of performance. We have paid particular attention to ensuring that all carbon fibre parts are UV protected through the use of special lacquers, as we know that our customers desire eternal beauty and perfection.
We accept no compromises, we take no shortcuts. Careful attention is paid to details to achieve that final sparkle that is the difference between good and supreme products. Good looks are not all we are proud of. Using state-of-the-art technological solutions, we ensure that each part is completely compatible with your motorcycle. All parts and accessories that are needed to install your Fullsix product are included, so you can install every piece yourself.
The uniqueness of our products is not just an advertising slogan, but the underlying philosophy of our company itself. Since we believe in providing only the best for your motorcycle, we have developed a unique production monitoring system that ensures that all Fullsix products are manufactured according to the latest protocols and “best-in-the-industry” standards. Through the use of unique barcode technology, CDT Group is the only company in the market that is capable of tracing products through the entire manufacturing process, resulting in products that you completely trust.
Fullsix stands for perfect looks, precise fitting, outstanding performance and supreme quality.
- Published in Motorcycles
Fullsix Ducati Monster 821 1200 Carbon Fibre Parts
Fullsix Ducati Monster 821 1200 Carbon Fibre Parts,
Visit our shop Fullsix Ducati Monster 821 1200 carbon fibre parts
- Published in Conquest Racing Parts
Aprilia RSV4 carbon fibre fairings in matte/satin finish by Sean Conquest Carbon parts
Aprilia RSV4 carbon fibre fairings in matte/satin finish by Sean Conquest Carbon parts
Thank you Sean for sending us in pictures of his truly awesome Aprilia RSV4. Sean has fitted our front nose cone, Tail fairings, Side fairing panels, Hugger & Belly pan. If you are interested in these products and would like further information please feel free to contact us by clicking on “Contact Us” in the top bar.
- Published in Conquest Racing Parts
CNC Racing UK Performance Parts
Conquest Racing Ltd is proud to be a distributor for CNC Racing UK. CNC Racing is a product born from a touch of innovation and design, valuable material that’s worked with care. From the most important motorbike races to the most sophisticated home garage, in the most creative customisations, we often recognize the CNC RACING touch.
The uniqueness of CNC Racing products and our competitors’ challenges strengthen our will to grow and innovate. Speed, precision and quality sustain the teamwork of qualified people that use the latest technologies and know-how in the sector.
Before reaching the market a CNC Racing product must meet all the demands of our test pilots who are used to extremely high efficiency, safety and style standards. This is what we call Quality. CNC RACING stands for quality, reliability and top technical level.
CNC Racing design, plan and develop products for our customers’ material dreams. The result of a superb job is a cause of pride for our customers. The materialising of the wishes of each individual customer and the fulfilment of expectancies is the focus of our activity and the benchmark for our products, our actions and evolution.
CNC Racing UK Performance Parts
CNC RACING and Althea Racing intensify their collaboration for the new sporting year 2014: in the next season the colours and the products company of Arezzo, a leader in carbon and alloy accessories for motorcycles, will be present throughout the formation of a motorcycle in the Team of Genesio Bevilacqua.
The enthusiasm and passion for challenges that are common to CNC RACING and Althea Racing in addition to an important project of product development, for years there has been a relationship of trust and cooperation at 360 ° that enrich the experience and technology personally and professionally.
CNC RACING and Althea Racing, adjustable rear sets RPS for the 2014 season:
The PE400 rearsets that Niccolò Canepa will be using in the 2014 SBK World Championship, fitted on the Althea Racing Team’s Ducati 1199 SBK Evo, are the forerunners of the new RPS product line. The line caters to customers who want to get their hands (and feet) on the same technology used by the champion riders ripping up the SBK World series tracks.
RPS stands for Racing Producing System, intimating how each detail and the technical feature has been selected and fine-tuned based on experience CNC Racing has gained by working with the top-performing teams and riders from the SBK series in recent years. CNC Racing UK is social: Join our CNC Racing UK based Facebook page and keep up to date with all the new exciting products being developed for your machine by CNC Racing.
- Published in Conquest Racing Parts, Motorcycles